This machine has been sold-Please contact us for similar machines
SOLD-35 Ton x 49.21″ Amada RG-3512-LD Press Brake
Manufactured in August 2005
Machine Number 1234
Request Quote
Amada RG-3512
The Amada RG-3512 is a hydraulic press brake of the central pressure application and parallel closing type. The Amada RG press brake series provides excellent performance in general sheet metal processing bending small and large parts. It has a press capacity of 35 Tons and a bending length of 49.21″.
Machine Specifications
Maximum Bend Length: 49.21″
Press Capacity: 35 Tons (39 US Tons)
Vertical Stroke of Lower Beam: 3.937″
Rising Speed of Lower Beam (in. /sec) at 60Hz: 2.992″
Bending Speed of Lower Beam (in. /sec) at 60Hz: 0.520″
Lowering Speed of Lower Beam (in. /sec) at 60Hz: 1.575″
Number of Cylinders: 1
Hydraulic Unit Tank Capacity, (US Gal): 10
Machine Weight (US Tons): 2.0
Control Specifications
Numerical controls
Position Command Method: Absolute Value Method
Number of Controlled Axes: 2 Axes
Input Method
D axis: Teaching with HANDWHEEL, and data entry with numeric keys (MDI mode)
L axis: Data entry with numeric keys
Least Input Increment
D axis: 0.0004 in.
L axis: 0.001in.
Display Method: 7-segment LED
Position Detection
D axis: Encoder
L axis: Encoder
Memory Capacity: 99 steps in L-ONLY mode and 99 steps in MDI mode or 198 steps in total
Drive Method
D axis: 200-W DC motor
L axis: 200-W DC motor
Origin Setup
D axis: Tool origin set by aligning tools
L axis: Origin automatically set ORIGIN START button
Alarm Display: Operational mistake and error are displayed by number
Ambient Temperature: 32 to 104 degrees F
Ambient Humidity: Maximum of 75% (relative humidity) without dew condensation
Backgauge Specifications
Feed Rate
D Axis: 0.01 to 0.60 in. /sec
L Axis: 590.55 in. /min
Travel Range
D Axis: 0 to 3.937 in.
L Axis: 0 to 19.685 in.
Stopper Height: 1.969 to 7.087 in.
Positioning Accuracy
D axis: +/- 0.0004 in.
L axis: +/- 0.0060 in.
