Sold-3600-Watt Trumpf TruLaser Tube 7000 Laser Cutting System
Manufactured in 2015
Optional 30′ Raw Piece Length
Beam Hours ~ 13061 and Laser on hours ~ 39069 as of 01/2023
Request Quote
TruLaser Tube 7000
The Trumpf Trulaser Tube 7000 is a flexible and high speed tube laser cutting system. This Tube 7000 is the optional large format machine capable of handling a 30′ Raw piece and with a modified off-load system, large finished pieces can be offloaded as well. Also, it is equipped with a 3600-watt Trumpf resonator for efficient material processing.
TruLaser Tube 7000 Specifications
Z-axis: 8 in. (200 mm)
Y-axis: 8 in. (200 mm)
Optional 10 in (254 mm)
X-axis: 252 in. (6500 mm)
Optional 360 in. (9200 mm)
Rotation axis A1-(Rotating Chuck and Feed Unit): 360°
Rotation axis A2-(Tube Feed Guide Unit): 360°
Capacitive height regulation range: + 0.79 in. (20 mm)
Positioning speeds, maximum:
X: 3,937 in./min. (100 m/min)
Y: 2,362 in./min. (60 m/min)
Z: 2,362 in./min (60 m./min.)
A: 900°/sec
Max. length of raw tube for automated production: 252 in (Optional 360 in.)
Max. wall thickness: 0.3 in. (8 mm)
Max. tube weight 8 in: 17 lbs / linear ft
Optional max tube weight 10 in: 25 lbs / linear ft
Length of finished part: 120 in – Standard machine unload
251 in. – PRS 6001
Tube waste length: Round/Rect./Square tubes: 4.7 in. (120 mm) Min.
Largest tube cross-sections that can be worked: 8 in. (203.2 mm) diameter envelope 10 in (254.0 mm) as option
Smallest tube cross-sections that can be worked: Round tubes: Ø 0.6 in. (15 mm)
Minimum edge length on square and rectangular tubes: 0.6 in. (15 mm)
Other types of profiles and sections (other than round, square and rectangular) must be examined separately with respect to machining, feed, separation and clamping possibilities;
Laser units: (in Watts) TruFlow 3600
System power consumption: See installation conditions
Control system: Siemens 840D
Max. working pressure: 290 psi. (20 bar)
Working height: 44.3 in. (1,125 mm)
Space requirements (standard version): See layout
Total weight: Varies with the configuration
*Accuracy (X, Y, Z, A axes):
Smallest programmable increment: 0.0004” (0.01 mm) / 0.001°
Positioning accuracy (Pa) + 0.008” (+ 0.2 mm) / 0.015°
Repeatability (Ps) + 0.002” (+ 0.06 mm) / 0.005°
TruLaser Tube 7000 (T03) standard supply:
TruLaser Tube 7000 (T03) with TruFlow 3600-Watt Laser
30ft LoadMaster Unit for 10” Diameter
21ft Flexible Part Removal Station incl. scrap conveyor
10” Chuck capacity
Swivel Mount Conveyor for loading individual tube and open profiles
Soft touch rollers
Pierce Line
Technology Package BevelCut
Technology Package SeamLine Detections
Adaptive Clamping for L & U profiles
TruTops Tube
3D Import Interface Module
Material Handling Options:
Loading
LoadMaster Tube 30 ft with auto tube loader
Automatic tube feed for round, square and rectangular tubes with the help of a bundle magazine. Can be used for tube lengths of 10 ft up to 30 ft. Integrated length measurement and zero point positioning of raw material in the transfer unit. The maximum bundle weight is 8.800 lbs.
The tubes are transported onto a buffer tack from the bundle magazine. As an alternative, tubes can be loaded on the buffer track manually. A gripper system picks the tubes up from the buffer track and transfers them to the feed and rotary station.
Slewable conveyor path for LoadMaster Tube
For manually loading of small lot sizes and the processing of special profiles.
Unloading
Part removal station 21-ft with brush conveyor
Larger form of the standard unload, allowing automated finished part unload of parts up to 21 feet in length.
Incorporates tube supports unloading to an incline, then to a brush table conveyor.
Additional part removing rear for part removal station
Parts can be unloaded on the brushtable to the front or into a box to the rear.
